Vijeo | Designer 6.2 Sp13 Work

| HMI Series | Supported | Minimum Firmware | Notes | |------------|-----------|------------------|-------| | Magelis GTO (Advanced) | Yes | V3.20 | Full support | | Magelis GTU | Yes | V1.15 | Requires firmware update | | Magelis STO/STU | Yes | V2.10 | No changes | | Magelis HMISCU (iPC) | Yes | V4.05 | Improved touch driver | | Magelis SCU | Limited | V1.20 | Ethernet/IP only | | Magelis XBT GH/GT (Legacy) | No | N/A | Discontinued in v6.0 |

The primary reason to upgrade to Service Pack 13 (or use it for new builds) is stability. vijeo designer 6.2 sp13

: Before going to the site, use the Simulation tool to test your logic on your PC. | HMI Series | Supported | Minimum Firmware

If you purchase a new Harmony GTO panel today, it may require SP12 or SP13 to be recognized by the software. Conclusion Conclusion That last one was key

That last one was key. The conveyor graphic was stuttering.