Stanley Fatmax Stud Finder 400 Manual //free\\

Never put your other hand on the wall. Never hold the tool with two hands. Never be touching the wall with your knee. You are the electrical interference. Let go of the wall.

Use the FatMax 400 as a magnetic locator for drywall screws. Slide it gently; the magnet will tug at the screw heads, revealing the stud line. stanley fatmax stud finder 400 manual

To get accurate results, you have to follow a specific sequence. Most errors with electronic stud finders come from rushing the calibration phase. Check the Battery : The unit requires a 9V alkaline battery Never put your other hand on the wall

: Keep the device still until you hear a final beep or see the "READY" icon. Calibration typically takes 1–3 seconds. How to Find Studs Once calibrated, you can begin your scan. You are the electrical interference

: The LCD will indicate when you are nearing a stud. It uses "One Pass" center-find technology to pinpoint the exact center. An audible tone and a red LED light will signal when the center is reached.

Continue holding the button and slide the unit slowly across the wall surface.