Some modified units are reportedly used on the 80m band, though this requires specific hardware adjustments. 630m Band:
: Adjust VR6 to modify the loudness of the alarm test tone.
The TKM-707 is a robust, high-performance radio. The most useful mods are frequency expansion (with caution) and adding a data interface. High-power mods are strongly discouraged. For amateur use, consider an external antenna tuner and band-pass filters before performing TX range modifications.
One of the most common complaints regarding the TKM-707 is its aggressive squelch behavior. Commercial radios are designed to be silent until a very strong signal arrives. For amateur use, where we often listen to weaker signals or marginal propagation, the stock squelch can be too tight, causing the beginning of transmissions to be cut off.
Some modified units are reportedly used on the 80m band, though this requires specific hardware adjustments. 630m Band:
: Adjust VR6 to modify the loudness of the alarm test tone.
The TKM-707 is a robust, high-performance radio. The most useful mods are frequency expansion (with caution) and adding a data interface. High-power mods are strongly discouraged. For amateur use, consider an external antenna tuner and band-pass filters before performing TX range modifications.
One of the most common complaints regarding the TKM-707 is its aggressive squelch behavior. Commercial radios are designed to be silent until a very strong signal arrives. For amateur use, where we often listen to weaker signals or marginal propagation, the stock squelch can be too tight, causing the beginning of transmissions to be cut off.
Cutting centers: Elumatec E555/1 (DGX), Elumatec E255/A, Elumatec SBZ610, Graf Synergy Multifab 3000, Graf Synergy EX1 Protocol, Kaban Cut, Kaban 1030 / 1040 / 1070 (InfoSys), Murat TT 405, Murat Maxer, Pertici 500F2K, Pertici SC55, Rotox ZGS 314, Techna TK145/10 Gold, Soenen Hendrix DVE
Welding centers: Graf Synergy SL4FF, Graf Synergy AKS6100, Kaban, Murat, Sturtz 4HSM_JC, Sturtz 4VSM_JC, Sturtz SE-SL-HSM 30/36), Murat,
Soenen Hendrix Q4, Soenen Hendrix AKS1600, Soenen Hendrix 4HSM_JC/4VSM_JC Kenwood Tkm-707 Mods
Machining centers: Articon SC-231, Elumatec SBZ 608, Graf Synergy STB Multifab 3000, Graf Synergy FAB CUT F1, Graf Synergy Fa1 Protocol, Kaban FA 10xx, Kaban SB3010, Mecal Kosmos 305, Murat NR 210, Murat SC220-40, SAC Sueri F300, Soukup Drilex, Soukup Spectra, Thorwesten PBZ Some modified units are reportedly used on the
Profiling and tenoning: Soukup Wizzard, Soukup Crafter, Soukup Crossline 500 The most useful mods are frequency expansion (with
EN 
FR 
RO 
ES 
BG 