R1 wants to reach 192.168.2.0/24 via R2: ⇒ Add route on R1: 192.168.2.0/24 via 10.0.0.2
The interface shows: *"ping from X to Y". Trace the physical path: netpractice 42 tutorial
Verify your configuration by checking the network diagram and ensuring that all devices are connected and configured correctly. R1 wants to reach 192
: Instructions for a device on where to send data. If a destination is outside the local network, it must go through a default gateway (usually a router interface). Reserved Addresses : netpractice 42 tutorial