Zpao Electric Bike Manual ((hot)) Instant

: The charger light will be Red while charging and turn Green when the battery reaches 100%.

: Ensure the stem bolts are tightened to the recommended torque (usually 15-20 Nm) to prevent slipping. Zpao Electric Bike Manual

This article serves as the you have been looking for. Below, we cover everything from unboxing and display settings to error code diagnosis and battery longevity. : The charger light will be Red while

Avoid charging or storing in extreme heat (above 35°C / 95°F). 4. Troubleshooting Common Issues Zpao - Product Page - – Merkava Below, we cover everything from unboxing and display

| Code | Function | Zpao Default Setting | Explanation | | :--- | :--- | :--- | :--- | | | Backlight Brightness | 03 (Max) | Reduce to 01 for daytime battery saving. | | P02 | Odometer Reset | 0 | Set to 1 to clear trip (do not touch P02 if you want permanent total miles). | | P03 | Voltage | 48V (most models) | Do not change unless you have a 52V or 36V rare model. | | P04 | Auto Sleep Timer (min) | 10 | Time before display shuts off idle. | | P05 | Pedal Assist Sensitivity | 3 (Medium) | 1 = slow response, 5 = instant torque. | | P06 | Wheel Diameter (inches) | 26 (fat tire) / 20 (folding) | Incorrect setting ruins speedometer accuracy. | | P07 | Speed Limit (km/h) | 25 (EU) / 32 (US) | In the US, you can increase to 40 km/h for off-road. Warning: Illegal for street use. | | P08 | Throttle Mode | 0 (Throttle works at any PAS level) | 1 (Throttle only works above PAS 1). | | P09 | Walk Mode Speed | 6 km/h | Do not exceed 6 km/h to avoid motor jerking. | | P10 | PAS Start-up Strength | 2 | Higher values cause "lurching" starts. |