Fanuc 11m Parameter List ((better)) Jun 2026

| Parameter | Description | | :--------- | :------------------------------ | | | Maximum travel distance (X-axis) | | P1001 | Maximum travel distance (Y-axis) | | P1002 | Maximum travel distance (Z-axis) | | P1010 | Rapid traverse rate (X-axis) | | P1011 | Rapid traverse rate (Y-axis) | | P1012 | Rapid traverse rate (Z-axis) |

| Symptom | Likely Parameter Issue | | :--- | :--- | | Axis moves wrong direction | #0060 bits (polarity). | | Return to reference point is off | #012x (Grid shift) or mechanical switch position. | | RS-232 does not send/receive | #0310 (Baud), #0312 (Handshake), or cable pinout. | | 90-degree rapid move arcs slightly | Mismatched #014x (Position loop gain) across axes. | | Tool length offsets act funny | #0240 (Offset type: 0=absolute, 1=incremental). | | Emergency stop without pushbutton | #030x (Soft thermal, OT signals). | | CNC powers on but servos won't enable | #0800 (Sequence of servo-on signals). | fanuc 11m parameter list

| Parameter # | Description | | :--- | :--- | | | Input/Output Units (Bit type). Bit 2 (IO): 0 = Metric, 1 = Inch. Bit 4 (ISO): 0 = EIA code, 1 = ISO code (ASCII). | | 0001 | Tape Format . Bit 5: Tape format selection (usually specific to the machine builder). | | 0002 | Stop Mode . Defines how the machine stops during reset or emergency stop. | | Parameter | Description | | :--------- |

: Device Select (1 for MDI/CRT port, 2 for Master PCB port). | | 90-degree rapid move arcs slightly |

: Typically found in the 1800-2000 range, though specific values like