Navi Sailor 4000 Ecdis Hot -

: Supports both Vector (ENC) and Raster (RNC) navigational charts, essential for meeting SOLAS chart carriage requirements.

If ignored, the system will initiate an automatic shutdown within 2 to 5 minutes to prevent permanent damage to the motherboard and storage drives. navi sailor 4000 ecdis hot

The Navi-Sailor 4000 ECDIS is more than just a digital chart display; it is a comprehensive navigation decision support system. Developed by Wärtsilä (formerly Transas), this system is designed to comply with the latest IMO, IHO, and IEC standards. Its primary function is to contribute to safe navigation by providing the bridge team with real-time positioning, sensor integration, and advanced route planning tools. The "hot" status of this equipment stems from its seamless integration of hardware and software, making it a favorite for both newbuilds and retrofits. : Supports both Vector (ENC) and Raster (RNC)

The "Hot" standby does replace the need for a separate, type-approved backup ECDIS or paper charts where required by SOLAS. However, it satisfies the "redundant configuration" clause (IMO MSC.1/Circ.1503) when installed as part of a dual-ECDIS arrangement with independent power and sensors. Developed by Wärtsilä (formerly Transas), this system is

If the unit continues to run hot after cleaning, consider the (Wärtsilä part no. NS4K-FAN-KIT). This includes high-static pressure fans and a revised heat sink assembly designed for tropical vessels.