The MSDS provides life-saving instructions. Here is the breakdown for Nitocote NT402:
| Property | Value | | :--- | :--- | | | Viscous colored liquid | | Odor | Aromatic hydrocarbon | | pH | Not applicable (solvent-based) | | Boiling point | 138°C – 144°C (for xylene component) | | Flash point | 25°C – 32°C | | Evaporation rate | Slower than ether, faster than water (BuAc = 1) | | Vapor density | Heavier than air (vapors settle near ground) | | Solubility in water | Negligible (forms a separate layer) | | Viscosity | 800 – 1,200 cP (depending on temperature) | | VOC (Volatile Organic Compounds) | Approximately 450 – 550 g/L (very high – check local EPA limits) | nitocote nt402 msds
Storage should be in a cool, dry, well-ventilated area away from direct sunlight. Ensure containers remain tightly sealed when not in use. Because it is a two-part system, ensure that the base and hardener are stored correctly to prevent accidental mixing. The MSDS provides life-saving instructions
Typically contains epoxy resins and 1,4-butanediol diglycidyl ether. Because it is a two-part system, ensure that
Fosroc Nitocote NT402 is an environmentally friendly, two-part epoxy resin coating used for chemical and abrasion resistance on concrete surfaces. It is particularly utilized in seawater tanks, sewage works, and foundation waterproofing. Hazard Identification The product consists of a , both of which present distinct hazards: Health Risks