Jmm-al10 Test Point [updated] -

Ensure the battery is disconnected during the initial connection process, as some tools require the phone to be powered solely by the USB.

: The fingerprint sensor is attached to the motherboard via a fragile flex cable; do not pull the back cover away too quickly. Disconnect this cable first. : Disconnect the battery connector to prevent short circuits during the process. 2. Locating the JMM-AL10 Test Point jmm-al10 test point

Before opening the device, ensure you have the following tools and software ready: Ensure the battery is disconnected during the initial

Performing a test point procedure requires disassembly. Opening your phone will void any remaining warranty and can cause physical damage if not done carefully. jmm-al10 test point